5v Black Pcb Waterproof RGB LED Rigid Bar DIY Sign Changable Bar Lights

Features:

1. This LED rigid bar is full addressable so it can be cut every LED.
2. The LED is the most popular chip WS2812, WS2811 chip build inside SMD 5050 RGB.
3.  Aluminum housing with epoxy waterproof IP65, both side of bar output the waterproof 3Pin connector.
4. Every 1 meter bar include 2pcs metal clip(for installation use), 1pcs T type connector(every 5m).
5. PCB Color: White and Black are available, PCB Width: 15mm.
6. Control: SD controller ,DMX Decoder, Artnet,etc.
7. Waterproof, energy-saving, low-cost of maintenance, and long life span.
8. Length: 0.5M, 1M, 1.5M,2M or customized
9. It is very cool for LED signs, whole building decoration,stage.
10. fully addressable ws2812b full color led rigid bar for building
11. cover color: clear cover and milky cover are available

Pictures:

 
Instructions:
 
1. Compatible 5V power supply
An LED 5Volt Driver is required to power the LED rigid bars. They are available to buy with the LED bar on this page or can be purchased separately in our LED driver department where we also sell waterproof drivers. Each metre of LED rigid bar requires 14.4 watts of power so choose a driver powerful enough to supply the total watts required.
 
2. Connection:
1) Signal wire: DC+,GND,DAT,
2) DC+ and GND connect to power supply;DAT connect to controller
3) Relative Controller: SPI controller support ws2811; when use DMX decorder, can connect to DMX controller and work with Madrix software
4) Support online control, T-200k can be online /off line controlled
 
3. Installation:
Each light bar is supplied with 2 metal clips - screw the clips to a surface then push the light bar into the clips to secure.
 
4. CE and ROHS approved to comply with Europe safety regulations.
Pictures:

 
Note:
1. Indoor and oudoor using 
2. Turn off the power before installment, don't touch the surface of the lights when light on 
3. Please make sure using in the normal environment
4. To avoid using nearby the hot or heat source place,where has the corrosive gas.
5. Make sure the installment place could afford 10 times of the weight of light.
6. Installed position must be no shock, no fire hidden danger
7. Do not touch or/and knock the product body during working
 
Discription:

Great for hotel, KTV, bars and other recreation place do adornment to foil 

atmosphere. Apply to pursue trendy romantic, like creative friend, used for 

personal apartment and the adornment of the new house, its soft, light and 

thin very suitable for DIY himself the characteristics of personal space. It is 

suitable for automobile chassis adornment, body and car decoration, high 

brake decoration and advertisement, decoration, designs citylighting project, 

the exhibition hall and building exterior decoration, etc.