Post Offer Free
Shenzhen Centuryled Co., Ltd  

Gold Index: 13917

You are here: home  > 5v Black Pcb Pixel Waterproof RGB LED Rigid Bar 60led/m With Magic Color

5v Black Pcb Pixel Waterproof RGB LED Rigid Bar 60led/m With Magic Color 

Place of Origin: Guangdong, China (Mainland) 
inquire
Add to My Favorites
HiSupplier Escrow
Share |

Product Detail

Model No.: AIA-1

5v Black Pcb Pixel Waterproof RGB LED Rigid Bar 60led/m

5v Black Pcb Pixel Waterproof RGB LED Rigid Bar 60led/m With Magic Color

 

Features:

  1. This LED rigid bar is full addressable so it can be cut every LED.
  2. The LED is the most popular chip WS2812, WS2811 chip build inside SMD 5050 RGB.
  3.  Aluminum housing with epoxy waterproof IP65, both side of bar output the waterproof 3Pin connector.
  4. Every 1 meter bar include 2pcs metal clip(for installation use), 1pcs T type connector(every 5m).
  5. PCB Color: White and Black are available, PCB Width: 15mm.
  6. Control: SD controller ,DMX Decoder, Artnet,etc.
  7. Waterproof, energy-saving, low-cost of maintenance, and long life span.
  8. Length: 0.5M, 1M, 1.5M,2M or customized
  9. It is very cool for LED signs, whole building decoration,stage.
  10. fully addressable ws2812b full color led rigid bar for building
  11. cover color: clear cover and milky cover are available

 

 Parameters:

 

Product Name ws2811 programmable pixel full color led rigid bar
Model Number SJ-10060-2811
Voltage DC5V input
Power 14.4W/M
LED Qty 60 leds/m
IC Chip ws2811 built-in 5050 RGB LED chip
Size/mm 1000*20
PCB Width 15mm
PCB Color Black/White
Connector 3Pin waterproof connectors
IP Rate IP20,IP65 epoxy waterproof, milky/ clear cover
Warranty 2 years

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

 

Pictures:


 
Instructions:
 
1. Compatible 5V power supply
An LED 5Volt Driver is required to power the LED rigid bars. They are available to buy with the LED bar on this page or can be purchased separately in our LED driver department where we also sell waterproof drivers. Each metre of LED rigid bar requires 14.4 watts of power so choose a driver powerful enough to supply the total watts required.
 
2. Connection:
1) Signal wire: DC+,GND,DAT,
2) DC+ and GND connect to power supply;DAT connect to controller
3) Relative Controller: SPI controller support ws2811; when use DMX decorder, can connect to DMX controller and work with Madrix software
4) Support online control, T-200k can be online /off line controlled
 
3. Installation:
Each light bar is supplied with 2 metal clips - screw the clips to a surface then push the light bar into the clips to secure.
 
4. CE and ROHS approved to comply with Europe safety regulations.
Pictures:

 
Note:
1. Indoor and oudoor using 
2. Turn off the power before installment, don't touch the surface of the lights when light on 
3. Please make sure using in the normal environment
4. To avoid using nearby the hot or heat source place,where has the corrosive gas.
5. Make sure the installment place could afford 10 times of the weight of light.
6. Installed position must be no shock, no fire hidden danger
7. Do not touch or/and knock the product body during working
 
Discription:

 

This led rigid strips will give you an atmosphere of freshness, if used in 

illuminating signs, interior lighting, cove lighting, or exhibit lighting, large 

cabinet lighting, project lighting, and any sort of close application task

 lighting. This led rigid light stripe features Brightness, safety, environmentally-friendliness, long-lasting but also energy saving. 

 

bigPhoto
 Mr. Tom Lee

Tel: 86-755-23125058
Contact to this supplier

Related Search

Find more related products in following catalogs on Hisupplier.com

Company Info

Shenzhen Centuryled Co., Ltd [China (Mainland)]


Business Type:Manufacturer
City: Shenzhen
Province/State: Guangdong
Country/Region: China (Mainland)

You May Like:

Product (290)